Jeep Garage  - Jeep Forum banner

First Weird Problem

2K views 2 replies 2 participants last post by  computerwiz621 
#1 ·
This now has happened to me twice, only seems to happen when the vehicle has been sitting for 6+ hours.

I get into the vehicle like normal, unlock by touching the handle and it opens. However I notice that the EVIC does not show "Press brake pedal to start". So I press the pedal and go to start. It starts up no problem, however where the odometer is normally displayed, it says "NO FUSE". Even in the EVIC, the menu for ACC is gone. Also the radio does not work, I have a message saying blind spot detection is disabled and the vehicle lowered itself to park. So I shut it off, wait 30 seconds and start it back up. This time, everything works perfectly, no errors, radio is on, etc.

Anyone ever have this issue before?

Thanks in advance.
 
#3 ·
Thanks Bryan.

Before I contacted the dealer (which I just love to do), I took a look at the fuses under the hood and found the IOD Fuse to be lose (its a 60A). Took it out and put it back in, this time nice and tight to make sure it clicks. So far so good. Also when I did a quick google search, seems some others had the same issue where it might not have been all the way in from the factory.

If it still happens, I'll post back but just an FYI should anyone have this problem.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top