Originally Posted by jocular
i couldnt find it
Here you go. Search is your friend.
Ok so I'm long overdue to update this thread from my original post. The 2 fixes are tested and confirmed. Depending on your specific smoking conditions you have 2 possible solutions.
1. Updated PCV - The newer version has more hard plastic instead of the softer rubber(about an inch). In some scenerios the soft rubber was getting hot and collapsing on itself causing positive pressure resulting in blow by.
2. For those of you smoking on startup and on inclines more than likely you will need the updated windage tray. Good news is its going into production... bad news is its not available yet.
It would take me a decade to type out the exact issue, but the short answer is the windage tray angle had to be increased to provide better drainage from the rear of the engine. The good news is that other than some smoking this doesn't cause any problems or damage to the engine or exhaust system. Though, I know its annoying, try to stay patient the solution is inbound.