I have posted how the current remote start, automatic A/C and or heat should now work. This is ultimately how the system was supposed to work. The replacement module software for the HVAC has not been released yet but I will keep you all posted. Here are a couple of key points.
-A/C used to come on at LOW during hot temperatures outside (verified on the only older build Jeep I could find so this may have changed a couple of times). Now the temperature sets to "Room Temperature" during remote start.
-Upon driver entry the user setting is recalled for that key fob (I am told that it does not do fob identification at distance so there is no user recall on remote start but does recognise the fob on entry).
-I used a lower temp setting to show the difference.
-The unit I tested still has the outside temperature issue because it was minimum 80 degrees outside and it was reading 64. I did take it for a short drive in advance and it is way off, so that fix is not here yet but does not affect interior temps any more.
-The system will recall 72 Degrees on remote start and will still do a temperature assessment to turn on other comfort features such as the heated or cooled seats and the Steering wheel.