I want the mopar CAI but only shops through 2015 for fitment. Looked at the install instructions and it looks like its due to the 2017 not having a power steering pump. Some of the brackets mount to the pump and also to the reservoir. Has anybody tried to mod one to fit by making different brackets or heard about mopar making one to fit the 2017?
Is the bolt hole still there on the 2017? My volant just sandwiches between the reservoir and the body. If the bolt hole is still there you could just buy the bolt.
The bolt up by the reservoir i might be able to get around but the intake tube support that goes to the power steering pump is the kicker..... as there is no pump!
Hello, I installed the intake on my 2016 HEMI. I used a rubber furniture leg which I bolted to the intake tube bolt that would normally go through the power steering pump. This just rests on the engine, been on the car for 3000 miles so far and no issues. Also, the metal heat shroud / housing around the intake needs to be slightly cut since it wont fit around the washer fluid tank. Those two modifications are required or else the 2015 Mopar intake won't fit.