Jeep Garage  - Jeep Forum banner

Moroso Catch Can

3K views 11 replies 4 participants last post by  2string1 
#1 ·
Has anyone installed a Moroso Catch Can on their 2012 Grand Cherokee 5.7 Hemi?
 
#2 ·
I don't have a catch can on my Jeep yet, but I do have the Moroso on my CTS-V. It's a high quality catch can that does a great job keeping my supercharger lid clean.
 
#9 · (Edited)
I just popped the hood to look. I did order the SRT Catch Can (not sure what the difference would be) I used one of the existing hoses and one supplied with the kit. In the picture the hose to the left has an adapter that made it fit better. The one on the right was cut from the hose sent with the Moroso. The bracket also comes with the kit and connects to a fitting on the engine block (see picture). Just undo the bolt and connect the bracket with the bolt. I tie wrapped the two hoses together to enable the engine cover to fit on securely. Make sure you face the bracket as shown in my picture. It will save you some time with the installation and insure easy access to the valve plus provide space to empty the can without removal. Auto part


Auto part Fuel line Engine Automotive engine part Vehicle


Auto part Fuel line Engine Suspension Automotive engine part
 
#12 ·
I just popped the hood to look. I did order the SRT Catch Can (not sure what the difference would be) I used one of the existing hoses and one supplied with the kit. In the picture the hose to the left has an adapter that made it fit better. The one on the right was cut from the hose sent with the Moroso. The bracket also comes with the kit and connects to a fitting on the engine block (see picture). Just undo the bolt and connect the bracket with the bolt. I tie wrapped the two hoses together to enable the engine cover to fit on securely. Make sure you face the bracket as shown in my picture. It will save you some time with the installation and insure easy access to the valve plus provide space to empty the can without removal. View attachment 54677

View attachment 54678

View attachment 54679
210hawkeye did you make your own bracket? I just received my can and the bracket is totally different than yours...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top