Jeep Garage  - Jeep Forum banner

18x10et-24

1K views 9 replies 3 participants last post by  Victorhugo90 
#1 ·
Hey everyone how would these wheels fit?? 18x10et-24. I'm just wondering how it would look and fit and what kind of tires the rims would need

the wheels are MO961 MOTO METAL
 
#2 ·
I'm guessing you'll have a tough time fitting that setup, that's a pretty aggressive offset. The wheels will stick out past the fender by about 2"...not sure what tire size you could use but I'm positive you'll need a lift of some sort if you're going that route.

For reference, I ran 20x10, -24mm offset wheels on my RAM 1500, 305/55/20 tires and they stuck out around 2-1/2" from the fender.
 
#3 ·
I'm guessing you'll have a tough time fitting that setup, that's a pretty aggressive offset. The wheels will stick out past the fender by about 2"...not sure what tire size you could use but I'm positive you'll need a lift of some sort if you're going that route.

For reference, I ran 20x10, -24mm offset wheels on my RAM 1500, 305/55/20 tires and they stuck out around 2-1/2" from the fender.

thanks for the reply bud, that's actually the look im looking for I like the wheels to pop out and not tucked in. I just wanted to get an idea as to how much they would stick out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top