Re: Anyone in UT that can donate their WK2 to Rocky Road for a level kit.....
Looks real good, I see that it sits level, I originally did the front only with the RRO lift kit which measured up at 1.75 with the left over 3/16 from the Tuff Country strut spacer plate. Total lift up "FRONT" was just shy of a full 2". With a full tank of gas and under driving the back end squated a bit to far and that's why I opted to modify the rear of the RRO Kit and cut it down to .75 and added a few weeks later. So I'm thinking that the RRO "LEVELING KIT" kit is comprised of just the "FRONT" of their "LIFT KIT" of 1.75??. All of my measurement were done on a "drive on lift" level ground with 1/2 tank of gas. So with options like skid plates, tow pkg etc..... take some measurements and see where you want to be and what you're going to be using it for. I think it's great to see a company that is willing to re-do lift/leveling kits based on consumer wants. ot me thinking that I'm going to sell my Wrangler and do another GC....Great looking ride BTW