Jeep Garage  - Jeep Forum banner

Black Lug Nuts Mod (2015 JGC Altitude)

Tags
2015
13K views 19 replies 13 participants last post by  DAC15 
#1 ·
Anyone know where I can get a decent pair of Black Lug Nuts for my new 15' JGC Altitude? I'm confused as to the size (I know its 14mm x 1.5) but get "Will Not Fit Your Vehicle" error messages using Amazon, etc.
 
#4 ·
Yeah you are right about the "bulge" otherwise they look "skinny" and don't cover the entire opening. I made that mistake of buying some like that. Also the ones you just posted got crappy reviews based on the fact that they black comes off easily.
 
#11 ·
Did these fit and fill the entire hole? These look right to me, but the part numbers don't match up to what SKUNKD Has posted, and it seems like he knows what he's talking about. I just wanted to purchase from Amazon was all.


Sent from my iPhone using JeepGarage
 
#8 · (Edited)
To clear everything up since everyone keeps ordering the wrong size...

16 4 Lock Gorilla Large Seat Factory Wheels Lug Nuts 14x1 5 M14 Rims Black | eBay

those are the correct set with locks or if you want to find them elsewhere

the part numbers for OEM size altitude black lugs are:


96641BDX (oem sized wheel locks)

66148BDX (Flat Type Lugnut 7/8" / 22mm)


Or you can do what Ant suggested above and order 20 locks (overkill but works as well)

THESE WILL NOT FIT AFTERMARKET WHEELS. You'll most likely need smaller lugnuts for aftermarket wheels.
 
#10 ·
96641BDX (oem sized wheel locks)



66148BDX (Flat Type Lugnut 7/8" / 22mm)

These are the parts that fill the holes completely on factory rims from gorilla you decide if you want all locks or 4 standard and 1 lock


Sent from my iPhone using JeepGarage
 
#16 · (Edited)
Those will hold the wheel on but they are not the correct part, or as safe as an OE size lug. The seat does not completely mate with the bearing surface. That'd be the part that matters. If you can see that shiny ring, the seat, that's the surface area you wheel attachment point has lost that used to provide the friction that kept your kids and or passengers safe. Now you'll have an equally small worry about slip as well as punch through, or resilience in small impacts. There is less seat area and more pressure on the area being used at the lower end of the seat which is thinner. Will it fail, not likely, but is it closer to failure, yes. Close is not good enough when it comes to certain things.

I've bought the wrong lugnuts several times, everyone does, I've used them on cars for years, but there are things you simply don't challenge after learning. Happy Holidays
 
#19 ·
Here are the ones from Summit that antsjeep suggested. (Gorilla Wheel Locks
GOR-96643BDX Lug Nuts, Steel, Black Chrome, Conical Seat, 14mm x 1.50 RH, Closed End, Locking, Set of 20) They fit perfectly and don't show any silver around the edges of the lugs. Also painted the calipers and rotor hats with VHT Gloss Black Caliper Paint. It really looks nice now all glossy.
 

Attachments

  • Like
Reactions: antsjeep
#20 ·
So what ones are the best fit? There are alot of sizes that come up in a ebay search. But there is only 2 that appear in ebay Australia. They have a weird looking shape and i don't think they would be long enough.
And I'm not keen on getting all lock nuts.
Cheers.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top