Goin to 33s...
im on the RRO 2.5 lift with 275/55-20s on a 30 offset wheel. As it sits, no rubs anywhere. Good clearance (0.8" off control arm bolt). with steering turned to meet the pinch weld/felt area im about 1/8"off the felt. Make it 1/4" when felt pushed back to weld. I feel like im going to gain another 1/3-1/2" there when I bend the weld over.
current tires spec at 31.9od and 11.2 section width new tires at 32.8od and 12.5 section width.
As far as diameter goes, I need approx 0.45" more to clear the new tires. With the weld folded I should have a total of .75 leaving me with a lil room to spare. The front side of the fenderwell looks good, I dont see an issue there.
May be cutting it close on the control arm bolt. I seem to have .75 clearance now, and with the 1.3" of total section width gain, that puts me .65" closer. Everything is gonna be quite tight.
Wish me luck