Jeep Garage  - Jeep Forum banner

help please, changing rear shocks

4K views 4 replies 3 participants last post by  uoweducks 
#1 ·
Ok took my 2014 JGC LTD in today to the shop to put my new wheels/tires on. I also had them install a set of SRT spring and non load leveling shocks in the rear.

I got a call from the tech saying that the load leveling shocks needed more parts to install at the top. I got the shocks from just for jeeps and have called them Corey was helpful but stated he didn't know what else was needed to finish the installation but said that this may be the part.

Mopar 68029590AE Shock Mount Strut Cushion Mount | eBay

Anyone else have experience with this. Will these be all that is needed?
 
#2 ·
Ok took my 2014 JGC LTD in today to the shop to put my new wheels/tires on. I also had them install a set of SRT spring and non load leveling shocks in the rear.

I got a call from the tech saying that the load leveling shocks needed more parts to install at the top. I got the shocks from just for jeeps and have called them Corey was helpful but stated he didn't know what else was needed to finish the installation but said that this may be the part.

Mopar 68029590AE Shock Mount Strut Cushion Mount | eBay

Anyone else have experience with this. Will these be all that is needed?
The Parts you need are;

Shock mount plate P/# 5181844AA
Shock Absorber shield / bellow P/# 68029592AC
Shock mount P/# 68029590AE
Bumper jounce P/# 68029591AC
 
#5 · (Edited)
I've ordered the parts suggested by wk2gp (thanks again) for anyone else looking to do this it appears that the shock mount has an updated part number but my parts guy helped me with that...

I'll post pictures shortly but even with the load leveling shocks the ride and cornering performance have been remarkable improvements.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top