Re: Lift a QL equipped WK2?
for example: the old range rovers used an arm attached to a sensor unit that was connected with a link (like a sway bar link) to the control arm. this is how the vehicle corrected for heavy loads, etc. and would adjust the suspension until that little arm was at the proper angle again.
so we replaced the links between the unit and the control arm with a longer one. the truck would then be tricked into thinking it was too low, and thus raise itself. this was good for a couple inches of lift.
maybe the jeep has a similar system? i dont have QL on my overland (by choice, didnt wait around for it. had 4 SUVs with air suspension and hated all systems equally).