Originally Posted by skunkd
The load level shocks are made by Sachs and the non load level are made by Tokico. The shaft on load leveling shocks is much thicker than the non load levels shocks. Also the top of the shock is metal vs plastic cap on the non load level.
I still haven't had the time to go snap a pic of the rear shocks. I was thinking about purchasing the OEM parts needed to setup the front Bilstein HD's and RM springs before I install them so I wouldn't have to disassemble the factory setup. It doesn't look like there are too many parts needed to do this, but I'll hold off until the shocks get here to see exactly what I'll need.