Jeep Garage  - Jeep Forum banner

'15 Altitude 4x4 with a few upgrades

19K views 16 replies 13 participants last post by  Chtibuf 
#1 ·
Just finished installing Bilstein 5100's, BFG KO2's (275/55/20) and wheel spacers (Bora 1.25 front/1.5 rear) so its time to show her off. Thanks everyone for helping me figure out my upgrades. In the next month or so im going to upgrade the springs for a little more lift, then in another month or so a roof rack.

The last two pics are the tires before the shocks and spacers, and stock.

Chris
 
See less See more
5
#11 ·
Thanks. I added the Bilstein 5100s all around which added 1.75" in the front and about a half an inch in the rear. The second to last pic in the original post is the new tires before the bilstiens were added though, which was the stock ride height. The bilsteins gave just enough lift to make the tires look "right", although my next move will be dobinsons springs all around to give 1.5" more lift all around.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top