* Skunkd's 2015 White GC Altitude *
The fog bulbs can be done without removing any rivets or panels. All you need is a drop cloth or moving blanket and to turn the wheel inwards (depending on the side you start with). Get on your side next to the fender and front wheel. Find the opening at the bottom of the fender/lower front facia. Reach into the fender and you will feel the connector on the back of the bulb. There are two tabs that need to be "un clipped" after that's done twist the bulb counter clockwise and it will fall out. Now install the new bulbs in the reverse order.
It should only take 5 minutes to do both fog bulbs.
Sent from my iPhone using JeepGarage
2015 Altitude - Billet Silver
SRT Springs, Taillight Bezels, Red Start Button, Pedals & Grille Mesh, Black Lugs,
Mopar 4" Chrome exhaust tips, 1.25" Bora Wheel Spacers, Sylvania Ultra H11's,
LED Taillight Bulbs, 15% Tint, Polk DB Center Channel, Mopar All Weather Mats