Originally Posted by Supraman93
I really like the way that upper inside door trim looks wrapped. Does this piece come off the door panel or do you just have to wrap and tuck it in the seam areas. I have a bunch of Neffy still and would like to try this.
You will need to take it apart which is relatively easy.
First you need to take the door trim off. Follow this
The top section of the door is plastic welded to the rest of the door. The picture below is from the che build. Its an 08+ but very similar to the 05-07's. You can clearly see the top section in white as well as the 15 or so plastic welds in grey.
Separate the two parts part, do your thing and put it back together.
I did my front and rear at different times and used different approach to detach them. The best way I found was to use a pair a pliers to squeeze each of the welds tight,making them sort of T shaped and then use a dremel to cut both sides of the T. You need to force the part out a bit but when you are finished it "clicks" back in and makes it that more stable before you glue back the welds.
Its really not that difficult. Good luck.
Here is one with the neffy ... ho much of it do you have left ?