time for an update
what it looked like few month ago
I added a magnaflow high flow cat and changed the exhaust tip with the "trans am style" tips that I had laying around.
did some more cutting and adjusting and it turned to that
I heatened the headlight in the oven (220°F) for about 5min and opened them. then started with 800 grit wet sand paper. sprayed two coats of high temp flat black and let it dry a day. then put it all back together and put the headlight back in the oven again for about 5mins. that way the glue will hold/stick the parts back together.
here's another before pic.
with the "new" headlights.
ok what else? rancho steering stabalizer, wheel spacers all around, 2" spacer lift and upcountry spring so the Jeep is 3" lifted by now. I'll replace the UC springs with OME 2" springs so my WJ will be lifted 4" soon. anyways, that's what it looks like now.
you see wheels are stock and tiny - I'm using these as wintertires because the tires are new.. for summer I got black 8x16 Soft 8's wheels with 265/75-16 Goodyear Duratrac.
began with the interior sound deadening.
it's like dynamat but this is 2.2mm thick. had my ex-mustang with this and also my 1979 chevy frame off and happy with the results.
pic from work.
yeah ok that's it so far!