So today I gathered some supplies!
It is tune up time!!! I am doing the engine oil, spark plugs, t-case, diffs (don't have that fluid yet), and some Seafoam treatment. I am currently running with some Seafoam in the crankcase, but I will add some to the fuel after the plugs and oil are changed tomorrow along with the vac line.
I also put together a nutsert instal tool!
Then I drilled out the three holes under the lower radiator support. They were practically useless from having the 4xG attached to them getting bumped around. The holes had distorted and the bolts were hardly grabbing anything. SO they were drilled out and I installed nutserts in their place. Now I can use 5/16" bolts to secure my skids!
This will make for a much more secure skid mount!!!
Oh! And I did take a nice little break to enjoy an ice cold Mountain Dew!