Well finally got my shocks back from QA1 today as they were defective from the factory so no blame on Stage6Motorsports. First thing I noticed was that on the lowest setting before you could push the top of the shock all the way down and it would stay the revised shocks will come back up a bit which is what they are supposed to do. Took about 20-30 minutes to install with the wheels on (you will need some extensions for the top bolt to reach it) set it to 5 on both sides and set off for a ride, no noise YEA!!! ride was comparable to stock and just a tad better so I pulled over and went to 7 BINGO I took dips and bumps I normally avoid or cause my Borla S to hit with my BWoody drop springs and it was very smooth not bouncy or rigid. Now I only drove a few miles but going over bumps is actually not jarring anymore and I will follow up as I get more miles on them and crank them up to 11/12 and get some launch vids of the front end raising (hopefully not).
Big Thanks to Dwight and Harrison for this product!!!
2012 Shelby GT500 w/SVTPP
2007 SRT8-12.23 Best ET to date:cool:
CMR tune and AFE Stage II Intake