Jeep Garage  - Jeep Forum banner

Dynamat question on 2017 GC

Tags
2017
2K views 2 replies 3 participants last post by  onlyina 
#1 ·
I started the replacement of the 6 speaker system on my GC today.
Started by applying Dynamat to the door skin on the front drivers side door.
Just want to bake sure I'm not missing anything but from what I could tell there is no way to remove the plastic inner door panel that is behind the exterior door panel. Putting Dynamat on the door skin is rough only working thru the speaker hole and the small back access panel. My hands and arms look like I had a fight with a large cat. Would be a lot easier if this panel could be removed.
 
#2 ·
Yes, it's a bitch for sure! :mad: I just finished doing all 4 doors on my Overland. I spent an hour on each door! I used a small roller to press down every square inch I could! The results, though, are amazing!! :thumbsup:
 
  • Like
Reactions: Chasx7
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top