Originally Posted by rdfm
I just installed my camera. Intially had the same problem as everyone, the steering wheel controls including the ones that control the dash screen and the volume and seek were not working (the cruise control and the paddle shifters worked perfectly).
I called just for jeep and they told me to use the original conneciton in the car not the one provided in the camera and to tap into the line. This partially worked.
Now my controls in the steering wheel work except for the volume and seek bottoms in the rear of the steering wheel. Lights and everything are on.
Any clue on why these two controls wouldnt be working? Has anyone had the same problem after tapping to the original pin?
I just had this installation done on my 14' Altitude. I had the same issues with the controls not working (controls for dash screen, volume, seek). I found that the blue wire provided from the kit was the only one installed at pin #45 location on the harness and the original wire (blue/orange) was closed off. I spliced the original wire and blue kit wire together and now all my controls worked.
Maybe you can revisit your spliced wiring to ensure they are secure. Again, after doing this same thing to mine there are no control issues.