Alright folks, after a long delay, this is the camera retrofit working.
And as a bonus, and to clarify that by adding the camera also works on a RA2 5.0 screen i posted the picture.
I was having trouble with the picture, it was all scrambled at times, and the dealer was pointing fingers at my wires and even threatened me to void the electrical warranty if there ever was an issue and they could pin point to my install. I was laughing on his face when he told me this because i know i didn't splice ANY factory wires. Today I finally had time to troubleshoot the install, and the issue was a defective pin by the radio harness. I just swapped the pin and it worked as it should.
Note that the tail gate is open as I was troubleshooting the camera, hence the picture is straight at the building.
Troubleshoot custom wire
If someone is interested, I will build a custom harness and provide assistance with the installation. PM if you are interested.
This harness will work on the RA2, RA3 and RA4, so both the 5.0 and the 8.4 will be covered.
Sent from my iPhone using JeepGarage