New Tweets are in! (with pics) - Page 2 - Jeep Garage - Jeep Forum

Go Back   Jeep Garage - Jeep Forum > Jeep Platform Discussion > Grand Cherokee - WK2 - > Audio/Visual/Navigation

Thread Tools Display Modes
Old 01-01-2012, 09:26 PM
Join Date: Nov 2011
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 2049
stacked73 is on a distinguished road
Re: New Tweets are in! (with pics)

The door panel has to come off in order to get the upper trim piece off. I tried to get it off without taking the door off and im pretty sure its impossible without breaking something! If you pop the door panel off you can easily take off the upper black trim the surrounds the window and also holds the tweeter. There are tabs holding the tweeter in the trim you have to release to get it out. I used a rubber like putty to hold the new tweets in because there is no way to secure them. My tweets were significantly larger (the casing was larger) than the stock tweets. Good luck and ask away with questions if you have anymore. Ive had my panels off about 5 or 6 times messing with the crossovers as well (i mounted the crossover under the 6x9 in the door. The speaker is in a baffle that sticks away from the door so underneath it was space the crossover would fit which ended up being about flush with the speaker after it was mounted.

Reply With Quote
Sponsored Links
Old 01-02-2012, 03:47 PM
My Jeep: 2011 5.7L WK2
Join Date: Jun 2010
Posts: 19
Thanks: 0
Thanked 2 Times in 2 Posts
Rep Power: 2558
pcastro1111 is on a distinguished road
Re: New Tweets are in! (with pics)

Thanks for the answer, I already removed the door panel. I switched the stock 6x9 with a 6" woofer... but couldnīt take out the upper door trim without feeling I was going to break the lower clip (a small black clip just under the tweet where the upper door trim ends), so you just have to pull that clip out??? it wonīt break??

My tweets are also a little bigger than stock ones (1" vs 1.1"), so I gonna have to figure out how to secure them as well... the rubber like putty may be a good idea.

My plan is to put crossovers near the stock amp, so I could use the stock wiring for the front speaker and tweets.


Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
blown tweets mikskillz Audio, Video, Navigation & Electronic Modifications 20 04-09-2011 04:52 PM
Pics! JoeSchmoe007 Members Rides-Showoff 16 11-01-2010 11:30 AM
SRT F/Bumper installed! Pics, Pics, Pics SoCalMoparWK Interior/Exterior/Visual/Lighting 22 09-01-2010 06:04 PM
NorCalWK Pics!!! Older Pics, but still pimp, SoCalMoparWK Members Rides 12 06-07-2009 12:06 PM

» Premium Vendor Showcase
Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community is in no way associated with or endorsed by FCA US LLC. Chrysler, Dodge, Jeep, Ram, Mopar and SRT are registered trademarks of FCA US LLC.