Re: Radar detector in 2014 GC overland?
Done, Just did it.
Ok the trick is:
Press on both sides towards the back of the top elongated cover to release it and pull back from the mirror towards you from the top.
Then grab from both side the other black cover and pull both at the same time sideways to release the second part of the mirror back cover.
Once you have both covers out you dont need to pull the mirror out of the windshield.
Just tap on the plug you see there with black to the black cable and then the red to the Red/pink with yellow stripe.
Voila!!!! no need to pull the whole mirror down which is a pain to put back just took me 5 minutes.
Make sure you make the connection tight to the other cable or the cover will not fit correctly. Put the bottom cover first, give it a hard wack from the bottom to snap in place(not with a hammer Please with the bottom of you fist) and then from the top of the mirror install the other one.