__________________ SCOTT The HARDER you work...the LUCKIER you are!
2014 REDLINE red Jeep SRT "BLOODIED Edition" 1 of 1
2013 Jeep Wrangler Unlimited Rubicon 10a
2013 Audi A7 premium plus-phantom black sportback
2012 FIAT 500 Sport-daughters Mopar....LOL
Some are reversing polarity on their Xenon Depot canbus adapter, some aren't. Is it a necessatity to switch polarity?
Sorry to revive an old thread, but on my can bus adapter from xenon depot the polarity was already correct to line up with the bulb harness plug in. The diagram they include with the kit shows the positive is on the bottom and the negative is on the top if you are looking at your harness laid flat. The adapter I received has the positive on the top and negative on the bottom(that's the way you want it) marked by a + and - on the plug. Although I have yet to install it because my battery and ground ring connectors are a smaller gauge than what is needed, so I'm still trying to figure that out. I'll let you guys know about the can bus polarity though once I get them installed.
Nice work with the HID. I have a couple of months with a 2012 Laredo and want to install HID's but it seems very difficult to achieve. Can you describe what you had to do to install the kit? Did you remove anything? Will appreciate any advice...