Re: centre console removal
I fitted a Tekonsha p3 into the little cubby.....not really a difficult job although the brake controller is a tight fit and you will need to leave a bit of slack in the wiring at the back so you can pull the controller forward to access the plug. Mine is 3m taped to the rubber mat - stays in place no worries.
You will need to disconnect some electrical connectors to get the console and fascia out - word of warning, don't turn the ignition on to test anything while connectors are unplugged - it will upset the canbus.
2012 Laredo CRD
Bright Silver with Quadralift & front recovery hook - (that has been used unfortunately)