I changed the cabin filter today, it was actually pretty easy.
The filter is located behind the glove compartment
To get to the filter you will have to push in the 2 side tabs on the sides of the compartment. This will allow the box compartment to drop down, there are hinges at the bottom and a wire that will keep the whole thing from dropping.
Once you drop the compartment if you look up in the back you will see the filter behind a blank piece of plastic holding it on.
On the left side there is a tab that you push to remove retainer.
Once this is removed you reach in and pull out the filter, it's about 10x 10" and pretty flimsy.
If you install a new one just reverse process, when you go to push in the new filter due to it being so flimsy it will take a little finesse to get it back in. Try to push the front of it in first on the side and again use some finesse.
Pretty easy now that I have done it. Filter was getting pretty dark and had a little order to it so I was glad I figured it out.
Be aware of the filters they say work for a 2011 on Ebay, those look nothing like to filter I bought at the dealership. Must be for a 2010 maybe.
Thanks for the step by step reads pretty easy
89 Modified wrangler to 95 Modified cherokee to 01 GC modified to 07 JK 4 DOOR X And now starting All Over Again with a stock 12 JGC WK2 limited