Jeep Garage  - Jeep Forum banner

Lexani 22's with Agressive road magnets...

10K views 44 replies 17 participants last post by  hamiltonGC 
#1 · (Edited)
Lexani R4 22x10 with 305/35/22 Pirellis
 

Attachments

See less See more
4
#7 ·
I am getting some slight rubbing on bigger bumps. Getting the adjustable control arms at this point may be a waste because I wont be able to adjust the camber to much more for fear of really rubbing. Right now, I'm .3 out of max spec right now so its not too bad, will have to replace tires more frequently, part of the mod game I guess.
 
#15 ·
Very nice!!!


Sent from my iPhone using JeepGarage
 
#17 ·
Looking good

I have the mid drop road magnets with Lenani 22's and the fronts rub as well when the wheel is turned I carry a supply of the plastic clips and replace them when they are pulled put :D I had to use a 8 mill spacer on the front to clear the Brembo Calipers did you have the same problem?
 

Attachments

#19 ·
Glad you like the rims they are 22x10 and the tyres are LIZETTI 285/35R22 I would like to fit 305/35R22 then the rolling diameter will be the same as the original.

I had to fit 8mm spacers to the front to clear the Brembos that means when the wheels is turned they just rub on the wheel arch trim but because it is plastic I live with it. If I go to the 305 tyres this could be more of a problem.

I bought the rims n tyres in Australia which cost a bomb but in the US you should find them a lot cheaper.

I get a lot of positive comments on the rims and am happy with the look.
 

Attachments

#20 ·
I have the aggressive drop so I am sure I will have even more of an issue. I ordered the mid drop and am waiting for my mechanic to put it on. I wonder why these wheels are rubbing when other people have gotten away with 305's with deeper drops. Do you know what the offset is?
 
#24 ·
Thanks my jeep had some hail damage it's in the shop for paint I have the wheels but haven't purchased tires yet with all the horror stories I think I should have went 9.5 in the front

View attachment 45063



View attachment 45062
I ordered 22 x 10 with 305's. The offset is +35. The distributor insist that they will fit because he has an SRT as well. We'll see.....
 
#28 ·
We can stagger these jeep aye? Run 295/35/22 front and 305/35/22 on rears what I do like about the 22x10 u get the concave effect showing more..
 
#30 ·
i meant cant lol... 4am post lol... Its it rolling diameter? So i could got 305/35/22 and 335/35/22 or does width play a roll?
 
#31 ·
It's overall diameter. The middle number in the size is the aspect ratio and is a function of the width. Ex. Even though the 305/35 and 285/35 have the 35 (aspect ratio) the same the 305 will have a larger overall diameter. Hope that makes sense.


Sent from my iPhone using JeepGarage
 
#33 ·
So I had ordered one 22 x 10 with a 35 offset and 305 tire. The distributor had promised it would fit and said that I could return it if It didnt. I guess he placed his order with the Lexani and they said no way. The only way the css15 will fit is if the offset is 28. Now, if I'm correct, a 35 offset with a 8mm spacer effectively reduces the offset to 27.

According to my math this will make the outer edge of the wheel stick out 3/4"

I am thinking that I will have them send me the 28 to check the fitment.

Anyone have any thoughts on this? If this doesn't work I may explore their forged line which has more flexibility in sizes. Problem with that is $$$$$$$

1010TIRES.COM - Wheel Offset Calculator
 
#34 ·
The place that sells this is same place motor351 got them from on there site they have only 22x9, i dont know if they changed it since motor351 got them but at 22x10 with a 305 tyre on it wont the tyre / \ tapper inwards on that wider rim?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top