#1
·
Dec 14, 2012
ok...so its been 10 days since I finished the Eibachs. Here are some measurements just done in my garage
Drivers front
floor to fender-30 3/4"
center cap to fender-16 3/4"
Drivers rear
floor to fender-32.5"
center cap to fender-18 1/8"
Passenger front
floor to fender-30 5/8"
center cap to fender-16 5/8"
Passenger rear
floor to fender-32 3/4"
center cap to fender-18 1/2"
Handling is amazing IMHO. All modes work perfect. No noise etc. Pics later
See less
See more
#2
·
Dec 14, 2012
Glad your happy... I noticed better handling after I put mine on too.
#3
·
Dec 14, 2012
Scott, pictures of before and after the install would be great! Was it an expensive mod??
#4
·
Dec 14, 2012
I will
it cost me $200 for install....a buddy helped and we used his garage and lift, tools etc etc.
#5
·
Dec 14, 2012
Not that bad at all.... I will hopefully lower my jeep next year once i do my performance mods..
#6
·
Dec 14, 2012
Hey Scott how high was your front with stock springs?
#7
·
Dec 14, 2012
I dotn remember right off hand. I think it posted it somewhere. Let me look
#8
·
Dec 14, 2012
The front are rated at a 1.1" drop right? If so I was at 32" so that will put me just under 31" in the front
#9
·
Dec 14, 2012
your fronts should be the same as mine...or close anyway. Your rear will be lower though
#10
·
Dec 14, 2012
Yeah, I dont drive it everyday so its taking a while to settle. Down to 31 1/4" in the front so far. I want the rear to get to 31 1/2" I dont think that will happen though.
#11
·
Dec 15, 2012
How come you didnt go with the stock fronts on the rear?
#13
·
Dec 15, 2012
Gotcha. What were the measurements with the front eibachs in the rear? 30 3/4 just like your front? Was that after they settled or do you think they still had to settle?
#14
·
Dec 15, 2012
yep...30 3/4"......just on afor a day or so...so yeah...they would settle some more I would think
#16
·
Dec 16, 2012
Hmmm I wonder if thats what it would stay at since thats what your front settled to and my rear is what my front was stock.... that would look sexy as hell
0
Reply
#17
·
Dec 16, 2012
Its too low! Theres no way to get your alignment.....especially camber.
#18
·
Dec 16, 2012
Yeah I remember you saying that. Probably would not do so well with people in the back either
#19
·
Dec 16, 2012
nope...the camber was HORRIBLE! It was so obvious standing and looking from the rear. The rear wheels were tilted out bad.
#22
·
Dec 17, 2012
Very nice, I better stop looking at these SRT8 posts though. I'm really missing my WK1 SRT8 now.
#23
·
Dec 25, 2012
total height on the drivers side is just under 31 1/4, hopefully it gets lower. From center cap to fender though is 16 and 3/4 think you being at 30 3/4 has to do with your tire sidewall height?
#24
·
Dec 25, 2012
my center cap to fender is 16 3/4"......maybe I measured the ground to fender wrong? I will measure again tomorrow.
#25
·
Dec 25, 2012
Your probably right at 30 3/4 cuz eibach claims 1.1" drop in the front dont they? At my height it would be just over 3/4" drop
#26
·
Dec 25, 2012
Yep.....just measured again....30 3/4" on drivers side and 30 5/8" on pass side
#28
·
Dec 26, 2012
I already have them in that exact color.....LOL:thumbsup:
0
Reply
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.