Here's a picture of the harness if it helps with some notes he gave me.
Going to add my full write up and pictures soon.
This is all from Jeep_Addicted
The fuse tap is simple. It goes into the Red 10 amp fuse in the Top left corner of the fuse box.
All the 12v+ connections go to the jump start terminal in the right side cowl area
Most of the - ground connections go to the - jump start terminal in the right side cowl area
One ground goes to the factory ground position in front of the right front wheel
And the lastly the two resistors need to be grounded to the chassis
Sent from my iPhone using JeepGarage
2014 GC Limited 4X4 3.6L 8-Speed Black/Black
Sunroof | 8.4RA4 | 20Inch Rims | CXV Running boards
Previous Jeeps: 2008 GC Limited 5.7L & 2000 GC Laredo