Originally Posted by Mikepersechino
My name is mike I just bought a 2014 Jeep Grand Cherokee limited
I swapped out all the interior bulbs aside from the led map lights attached to the board. I saw your posts which are very helpful btw, its driving me crazy with just yellow stock ones in! I was curious if you would provide a step by step to swap the led stock ones out! I have a bunch of 5smd 194bulbs left and I saw it may be possible to use the smd chips from those!?
Any info is helpful and the more soecif the better lol
I'd be supergrateful for a how - to on this!! Thank you so much
Check out my post in page 14 of this thread. Its not the easiest thing in the world, but most definitely possible. Takes some soldering, so depending on your skill level, it wouldn't be the worst thing to recruit some help in this area.
The bulbs you need can be ordered from superbrightleds.com and cost like $.65 a piece or something like that, so buy a few in case you mess 1 up.
Take your time, but it can easily be done in 1 sitting.
Good luck! Post pictures when you get done