Jeep Garage  - Jeep Forum banner

A-pillar pull bars?

1K views 9 replies 5 participants last post by  NetworkTV 
#1 ·
I am vertically challenged and I do have to make a small jump to sit on my Jeep. Are there any aftermarket companies that make one of these?? Vehicle Vehicle door Car Automotive exterior Windshield


Im planing to lift my jeep soon and I will definitely need it then. I don't want to tear up my seat.


Sent from my iPhone using JeepGarage
 
See less See more
1
#3 ·
I did a Google search and found nothing that attaches to the A-pillar. There are a number of things out there to assist though.


You didn't mention what Jeep you have, and I mention this just in case you overlooked it. Some Jeeps have a handle the pulls down from the top center of the door frame. If you can reach it, you may find it is in a better position to get you into the seat.


--
 
#4 ·
I have a 2013 wk2. While mine has the one over the door by the roof, i feel this is not strong enough to use daily for that purpose. Even with my soaking wet mighty 160lbs. I know Rams have it and there are some aftermarket one for JKs , but nothing for wk2


Sent from my iPhone using JeepGarage
 
#5 ·
Better to be safe than sorry. My guess would be that Jeep doesn't install something like that and design it for occasional use. Maybe Jeep can provide some information regarding its strength.

--
 
#6 ·
I'm not sure there's anything under the cover to fasten something like that too. Don't worry about the overhead ones, however...they are there exactly for the purpose. You could also consider side-steps to assist with entry/exit. (I use QL to lower the vehicle for easier entry)
 
#10 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top