Just finished upgrading my fogs to hids. Bought a 5052 kit for the fogs and h11 for the lows. Long story short the h11 I bought for the lows is now installed in my fog lamps. Owners manual is wrong on bulb type unless I read something wrong.
Also anyone have a step by step to remove the front bumper? After I exchange the 5052 kit I gotta tackle the low beams.
And in case your curious its a zenex kit from amazon 6000k. Did not need relay kit but I did need warning cancellers.
That covers the headlights and not a "how to" for the fog lights. the OP put HID's in his fogs. Thats why I asked if there was a detailed description of how he did it. I just want to know how to run the wires and place the ballasts, etc.
2014 Jeep Grand Cherokee Overland
3.6L V6 Brilliant Black with Black Interior
You don't need to pull the bumper to replace the fog lights or the low beams. Just turn the wheel all the way to the right and pull the access cover off, remove the front 2 Christmas trees, the 10mm bolt and the next Christmas tree at the top and then move the liner out of the way, repeat for the other side.