Jeep Garage  - Jeep Forum banner

HID kit for 2014 Cherokee Limited

69K views 223 replies 53 participants last post by  Madjets28 
#1 ·
Picked up my Jeep this weekend and since I didn't get the Lux II package I don't have LED or xenon. I still want to incorporate HID's those since the headlights already have the projections on them.

I know it's early on and vehicle is new. Any recommendations on where to go to buy and what to get. I want to do it right and make sure it doesn't fail.

I noticed the xenondepot is that the best choice?
 
#202 ·
Bumper removal is not at all necessary. On the passenger side, unhook the two large cables and then unclip and swing the heat sink out of the way. On the driver's side, remove the intake box. This will give you enough room to get the bulbs in/out. It is tight and you will be working blind but it is definitely do-able.
 
#206 ·
Hey Danny,
my buddy purchased an H11 extreme kit for his jeep & didn't receive a Can bus fix. Just the bulbs, bballasts & relay kit. We input that it was for a 2014 GK. We are having issues with the passenger bulb going out after about 5 minutes of use. It flickers then goes out. Could this solve the issue?
 
#211 ·
Hey Steve,
Just wondering, i had an HID canbus kit in my 2014 grand cherokee but it still didnt work. 1 ballast would always blow or both ballast would blow after 2 weeks of use. I found out it's cause of my DRL's and the worst part is i don't have an option to turn them off in the uconnect cause it's Canada. I would have to get the dealership to reprogram the software to shut off my DRL's. If i do get that done, will the HID's work properly?
 
#208 ·
Thanks Steve, I'm guessing you're referring to product code CBFIX currently on sale for $18.99.
 
#213 ·
No, i went through a good friend of mine that has a local shop here and they ordered everything and installed it for me.
I've been doing a lot of research for the last few months and found that my DRL's we're the issue. I was just wondering if i were to cancel my DRL's, would the can bus kit work properly?
 
#215 ·
hmm well i know they used 2 different kits that should of worked with the DRL's but it still didnt work...strange. The kits you guys have at XenonDepot, are these new kits that just came out with the slim ballasts? If so, im going to see if my friend at the shop can look into this or if they can give you guys a call to make sure these will work. Im just a little hesitant because i went through 2 different kits which were suppose to work and it didnt work.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top