Originally Posted by TX_Driver
I've never done any soldering so I'm not sure if I should try this. Any tips or advice? What exactly do I need to solder the wires? Soldering iron, solder and maybe some heat shrink wrap?
It is not necessary to cut and resolder the wires back together.
You can use the 3m scotch lock, T-taps or Posi-taps to get power wire taps make installation so much faster.
I can't understand why they didn't come up with some type of plug and play solution.
They could of done it on the right (passenger) foot well light since the wire plugs into the light housing that would have been a great spot to add plug in adapter.
As for changing the color of the logo you could just change the led.
But since the logo illumination is done by an LED shining light into some bunched up fiber optic I thinks that is what makes the lights weak when you change the color.
I am thinking about adding an LED Dome light panel behind the "Jeep" logo to see if it improves the lights output.