So I was sitting around thinking about what I should do next. I came up with the idea of putting a light under the hood since there isn't one. It's a easy installation a couple crimps and splices and bingo all done. Very easy install.
Mounted the light with 3m outdoor double sided tape.
Then I ran the wires behind the insulation and came out by the battery post.
I cut a hole for the switch in the plastic piece that holds the main harness down.
Wired the switch and hid the wires.
Took my all of an hour to do, while drinking a few coronas.
Mounted the light with 3m outdoor double sided tape.
Then I ran the wires behind the insulation and came out by the battery post.
I cut a hole for the switch in the plastic piece that holds the main harness down.
Wired the switch and hid the wires.
Took my all of an hour to do, while drinking a few coronas.