Jeep Garage  - Jeep Forum banner

Lower Black Applique

5K views 21 replies 11 participants last post by  IndustrialChaos 
#1 ·
#8 ·
I've seen you can pop off the lower Valance but does that chrome trim piece come off easily and I also want to change the fog surround can that be done more easily when the lower Valance is popped off or do I need to pop off the whole front end of the truck.
 
#4 ·
#18 ·
Bob, So you have to take off the lower clip then work the chrome off? Any particular place to start? Also, Can I get to the fog chrome surtrounds when the lower clip is off to replace with black? Has anyone done it this way?
 
#19 ·
You have to remove the lower bumper first, once you flip it over you'll see a ton of clips that need to be released to get the chrome piece off. You also have to remove the black plastic piece that's in the center of the chrome. I say start on the outer edges and work inward, it'll help keep the clips from wanting to re-engage.

For the fog lights you can do it that way or, since you're already doing work to the front bumper, just remove the entire bumper. That way you'll get easy access to the back of the fog light housing to remove it. I'm pretty sure you have to take the whole housing out to get the chrome ring off.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top