Originally Posted by BuckeyeSRT
Anyone know what happened to this .pdf? or know where I can find the breakdown of taking apart the rear bumper?
I am confident you can do it with out the pdf.
You are gonna need:
Nylon pry tool or small flat blade screw driver
T-30 Torx driver
I forget what size torx you need to remove the heat sheild.
I use a panel removal tool to remove the nylon rivets.
The only trick part is the connection plug that goes to the parking sensor if you have them.
The fender flares should just pop off once you start tugging on them but if they don't you will have to use the small screwdriver to depress the tabs.