05-07-2014, 05:33 AM
Re: Taillight Solutions rear fogs on a 2014
Since the wiring has changed slightly for the 2014 year you will have to make a minor modification to the harness
See below: Taking the female connector (the one that would attach to the bulb socket)
If you are going to convert the kit you already have you will have to cut the yellow (or the middle wire of the three) from the female side of the plug. Or you could take a small flat blade screw driver and remove the red lock from the plug depress the looking tab and pull the middle wire out.
Then use a wire tap to pick up the park light signal from the white wire on the plug that feeds the LED halo.
It is not hard you will have to strip back the wire loom to gain access to the wires.
- '12 Laredo X V6 Deep Cherry Dark/Mid Greystone, QT1
- Outside: colormatched Altitude Grille, S Limited rear valance, Euro frt. bumper moulding, Rear chrome trim. Sharkfin, 20% tint, RFUK (built my own)
- Inside: Alcantara steering wheel/shift knob,SRT dash trim, illuminated front scuff plates, stainless rear scuff plates, bright pedals, F/R footwell lights
- Performance: OEM dual exhaust conversion, HD brakes, E-code projectors, JW Speaker fogs