Hey everyone, just threw on 275-55-20 BFG All-Terrain T/A KO2's on my 2015 WK2 Summit. Love the tires, no rubbing, but it's very tight in the rear and the tires almost touch the felt wheel well liners.
In the pictures below, you'll see what the gap looks like at Normal Ride Height, NRH with me pushing the liner to show that there's room to pull it back, and then Off Road 1 and entry/exit.
My goal is to figure out a way to pin the liner back effectively so that there's a little bit more clearance here. If I can't pin it back, I'll likely trim the liner so there's more room in this particular spot.
Let me know if you have any ideas/experience with this.
Edit: All of the pictures are horizontal. If you imagine they're rotated 90 degrees clockwise, you'll see that this is the rear driver's side tire and it's looking at the tire from the back sorry for any confusion.
In the pictures below, you'll see what the gap looks like at Normal Ride Height, NRH with me pushing the liner to show that there's room to pull it back, and then Off Road 1 and entry/exit.
My goal is to figure out a way to pin the liner back effectively so that there's a little bit more clearance here. If I can't pin it back, I'll likely trim the liner so there's more room in this particular spot.
Let me know if you have any ideas/experience with this.
Edit: All of the pictures are horizontal. If you imagine they're rotated 90 degrees clockwise, you'll see that this is the rear driver's side tire and it's looking at the tire from the back sorry for any confusion.