I successfully installed skid plates on my 2014 limited, including the missing transmission belly pan.
The parts needed are:
82211994AB Jeep Transfer case skids Qty: 1
82211995 Front Axle skid Qty: 1
5182517AB Belly Pan (trans) Qty: 1
6105102AA Bolt Qty:2
First install the two bolt inserts (nuts) from the front skid on to the cross member in front of the trans. Then install the belly ban front (lip in middle sits on top of the cross member) and install purchased bolts in the two locations on the back cross member. Front cross member:
Next loosen the two bolts on the front plastic skid and install the front axle skid plate using those two bolts and two of the bolts included with the skid plate package.
Next follow the instructions for the transfer case skid plate install. I modified the fuel line skid by laying the metal skid on top of the factory plastic skid and trimmed accordingly. I also had to trim the transfer case skid for my running board mount. See pics below. Hope this helps