Well i just finished and only pulled the pass side lower dash , cut/ drilled the spot welds on the support/ changed the heater core , aluminum lines and new o rings... Then bolted the dash support back together .. Took about 2 hrs .. can prob do it now in under a hr .. So much easier not pulling the dash .
would have welded it back together but i made peices out of sheet metal and used self tapping screws to hold it together just in case i have to pull it apart again.
2005 jeep grand cherokee limited 5.7 , AFE Intake, Dual Exhaust , SRT8 Front bumper.
1999 Turbo Mustang Cobra..Too much to list