ok here is a pic...looks like i have the normal 3 wires (green, black, black w/purple stripe)...so i guess i will just need to splice into the green wire and the black wire. does it matter which wire get's which end of the resistor?
__________________ Rob | 2007 Grand Cherokee Laredo ORT
OME HD Lift | RRO UCA's | JKS Front Discos | Daystar Spacers Stacked in Rear | Rusty's Extended Rear Sway Links | Rusty's Adjustable Rear Tackbar | 32" BFG MTs | Black 17" Moab Wheels | 1.25" Spacers | 30% Front Window Tint | SRT Pedals | JR's Custom Shorty Billet Antenna/Locks/Bezels | Front Recovery Hooks | Rear Recovery Shackle | Painted Headlights | 6k HID Lows | 3k HID Fogs | Painted Tails | Tinted 3rd Brake Light | 7w LED Cree Reverse Bulbs | LED Interior & License Plate Lights | Power Wire | Fastman TB | K&N CAI | Hypertech Max Power Programmer | Solid Rear Diff Cover | R1 Concepts Drilled/Slotted Rotors | 4xG Front Guard | Aspen Creek Boulder Grille
Robpp... Thanks... Know anything about the 08-10's? I have 6 wires going into the socket... Two black, two green, and two black purple... Wondering if anyone has faced that... My switchbacks work if the resistor is hooked to either of the green wires or both. I tried another resistor on the marker light and haven't had any changes...
On the 08+ get a good light n there and look for the beginning of the harness. There is a connector where it starts. You want to find the wires from harness connector. Then the go into that turn plug and come right back out. Go to side marker etc.
You want to intercept the wire from connector and tap their.
I can say on these that it seems to be MORE that had to use 1.5 ohms.
But I would buy 2-3 ohm resistor. Cause you make them into 1.5 IF necessary. Buy 2 more if that happens.