My buddy will be installing a cam from Inertia Motorsports in a few weeks on my 5.7; However, he also wants to know if he can port the heads while he's down there. Has anyone ported the heads on a 5.7, if so, how did it go? Is there anything I should worry about?
Im about 100 percent sure I will be doing the performance heads. Just making sure all my bills are in line first, before I pull the trigger on them. Not sure as the type of heads he was referring too, but Stu did tell me that in conjunction with the spartan plus cam I should gain about 75+ to the rear.
I can't wait.......
I will keep you updated.
Speaking of the Spartan Plus Cam, some of the hardware just arrived!!
Are you two wheel drive? It's better if you get the Heads anyway. It will be a different beast. Also you should look at a Stage II Valve Body from Sharadon.
Your definitely right. It just makes no sense for me to install the cam right now, especially when I really want to do the heads too. Oh, and I'm two wheel drive. If you don't mind, can you send me a link for the stage 2 valve body by sharadon.
Everything except the camshaft. Although the camshaft is made in California, and I live in California, I asked him to send the cam back to his self then send it to me to save me some money on taxes. It'll be another week and half before I see it.
I see. Make sure you either get a Tune from them or Johan. If you pay the $200 from Inertia they will give you unlimited revisions. best thing to do later is get it Dynoed.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Garage - Jeep Forum
1.7M posts
176.1K members
Since 2009
Jeep Garage is where you can talk about all your favorite jeeps including the Cherokee, Liberty and Grand Cherokee.