Jeep Garage  - Jeep Forum banner

255/75r17 on WK

51K views 24 replies 11 participants last post by  AA-Train 
#1 ·
I know the question has probably been answered before but I can't seem to find a straight answer. I'm looking at a set of 255/75R17 JK rubi wheels and tires and I was wondering if it will fit with only a 2 inch lift.

Thanks!
 
#2 ·
I just picked up a set of 255/75/17 off a Rubi and put them on this past weekend. I have a 3 inch OME MD lift with 1.25" spacers and it fits great. Haven't felt any rubbing, but also haven't put it at full lock. I had a set of 265/70/17's on there before,
Here is picture. I have more than 2 inches, so not sure if it answers your question. You would probably need a spacer...

 

Attachments

#3 ·
Or you can run without spacers and only rub a full lock (the very last turn of the wheel that makes the engine strain).





 
  • Like
Reactions: imdabeast2114
#5 ·
If they fit without a lift, then.............

 
#7 ·
im running them with a 2" lift, i have 1.25" spacers and had to fold the pinch weld. working on extending my rear bump stops also because the inner fender chews up the tires when stuffed.
 
#10 ·
I bet they don't rub with the Moab wheels without spacers because I barely rub at full lock with the OEM wheels without spacers. The Moab wheels give a little bit of offset.
 
#11 ·
i put rubi rims and tires on with ome lift and 1.5 spacers and it rubbed a lil had to do pinch weld but super easy to do
 
#14 ·
How's that worked out for you? You got any pics of that? It helps when discussing mods w/ my wife if I can show, "Hey this guy's done it. It works & it looks like this." :D
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top