Hi - great instructions. I just discovered them and will be following next weekend. One of the picutres seems to have been lost:
"...When the (4) bolts are removed, seperate the hub here... it makes it easier if you remove the spring from the emergency brake on the side that the cable is NOT attached
The previous step takes some working ...I used a flat head screw driver and a hammer to get it started and then used the brass hammer to tap on the bolts to push it the rest of the way out. This WILL pull your axle too, so be careful. this is the hardest part of the job. take your time and work one side at a time back and forth to pull it evenly!!!
Once you remove the hub, it will look like this-don't worry when you see a little bit of oil dripping, it's normal!"
Is it possible for you to replace it?