2015 - where to tap for brake controller stop light activate
I know the information is very likely in here somewhere but easier for me to simply ask.
I will transfer my existing Tekonsha P3 from our 2012 to our 2015 myself.
When I wired it originally in 2012 I accessed the loom in the LH rear behind the torch, (where the dealers connect the tow bar wiring harness) , tapped into the stop light wiring there and ran the activate wire all the way to the front into controller I mounted in the little cubby. The blue brake wire ran all the way back and into the dealer wiring harness adjacent to where i started. Worked fine.
My question - Are the 2015s wired the same?
I know there have been issues with all three stop lights coming on when the controller is manually activated, but this isn't a big hang up for me.
i simply want a reliable stop light signal that won't conflict with the bus system.
Thanks in advance
2015 Laredo CRD
Billet Silver with Quadralift, front recovery hook, Mopar towbar
Upgraded from 2012 CRD that did the job brilliantly for 4 years
1975 Holden HJ 308 Monaro 4dr - oldie but a goodie