How bout bi xenon in low beam,then have quad hi's.
Paint shroud, Cree turn bulbs
Thought this thead needed new life!!
All the projectors I use are bi-xenon. Not sure what you mean by quad highs. A quad set up would be 4 projectors meaning low beam and high beam which is what most of the sets I build are. As for the Cree signals. Cree is a little much IMO for signals. Plus most opt for blink only led signals or switchbacks. Cree is better off in your fogs or your highs ect. Not much need for a 3200 lumen turnsignal.
What I meant was with the bi xenon lows , that would give me 4 lights as high beam.Not as to bi xenon in for highs.thouhht Cree had lower watt for signals..so a flash only is fine.So basically the last pic above you posted to ne done on WJ housings.