Jeep Garage  - Jeep Forum banner

how to wire led & halos

8K views 46 replies 11 participants last post by  mrjaydeeone 
#1 ·
hey everyone just received my projector head lights for my wj am going to wire the leds to the corner turn signals and the halos to just the middle parking lamp i would like to know which wires are power and which one are ground i dont have a test light so which wires would be power the green one or the purple one
 
#3 ·
If I am not mistaken when I wired mine up the green was with the flasher and the purple was steady with the parking lots, and black is ground of course
 
#5 ·
am done i have pictures but my phone has no usb i tried sending to my email but doesnt work and it blows but i have no digital camera either ill try and get em some how on here
 
#8 · (Edited)
Looks good man!!!!

Only other suggestion I have is maybe getting LED turn signals if your into that kind of thing.

(Just be aware you will have hyper flashing).



I have a white parking light and amber turn signals.

Testing a new relay for fixing the hyper flashing hopefully this weekend as well.

Now that you got the new headlight assembly, you need some HID's!!!!

:thumbsup: :thumbsup: :thumbsup:
 
#15 ·
What do you mean by turn signals seem to always be on?

If you are tlaking about the 3 LED's it is all up to how you wire them. If you wire the 3 LED's to the turn signal then they will flash when you turn on the turn signal i assume (heehawbus has his this way). I wired mine with the parking lights so that when I turned on the parking lights the HALO's and LED's would come on and i could turn them on without having the low beam on. If you really want the most control, just run a switch to the inside cabin somewhere and control them with a switch.

If you are talking about the corner turn signal, that is not normal
 
#18 · (Edited)
NO you are right - that picture is not correct.

I am not sure how the owner (maybe black_wj?) managed to get all the parking lights, and the turn signal light to stay on at the same time -that is not normal (this picure reminds me how much better the white lights look than amber :) ).
 
#19 ·
NO you are right - that picture is not correct.

I am not sure how the owner (maybe black_wj?) managed to get all the parking lights, and the turn signal light to stay on at the same time -that is not normal (this picure reminds me how much better the white lights look than amber :) ).
Yeah I didn't think it was right. I'm sure I saw some videos on you tube where those lights were constantly on too, or at least it looked like they were.
 
#20 ·
Weird, I had never noticed that - but doing a quick search on youtube I see a few of the folks who installed them managed to have there corner 194 bulb on after installing these?

I am not sure why that would happen, only one or two videos out of the quick 5 or 6 I saw didn't have them on.

Can anyone confirm who has yet to install the bulbs HALO/LED assembly that the corner turn signal bulb #194 is not on (i thought it only came on when the turn signal was turned on and at which point would flash on and off, other than that I was under the impression it would always be OFF).

Interesting... :confused:
 
#39 ·
The top link is how my stock lights work on my 2001 wj. Why would it change if you put in new housing the bulbs and wires are still the same? I believe it's normal. All parking lights and sidemarkers are on all the time then the sidemarker and inner turn signal alternate flashing when turn signal is applied.

Scott
 
#22 ·
this might help

inside has 3 cables green, black, & black/purple
middle has 2 cables black & black/purple
outside has 2 cables green & black/purple

black is ground
black/purple is the positive power
green is the blinker cable

if you want the leds and halos on with the parking lights just tap into the 2 cables in the middle.
 
#26 ·
i wired my leds to turn signal and the halos parking lights if i wanted the white lights to be on by them selves then i would of wire them to a aux switch but i dont really care as long as they work
 
#30 ·
unless the headlights have not been out of the ball socket it might be a bit tough to pop out the headlights.

simple thing is to just used wire taps, but since were in NY tape alot so no dirt causes corrosion. theirs room behind the headlight to mount the HIDS.

max its a 2 hour job if you take your time, just don't touch the bulbs with your finger tips
 
#42 ·
So quick question. I have a 2000 Laredo and I've been wanting to get halo headlights for it but the ones I've found on ebay that I want say that they don't fit the Laredos. I didn't think there was a difference for headlight fitment so does anyone know what it would be that would make them non compatible? Thanks.
 
#43 ·
they will fit just fine. the only only issue I believe is some WJ models have amber lenses and clear signal bulbs and other models have clear lenses and amber signal bulbs, so you might have to get amber bulbs, if you currently have lights with amber lenses. Since it looks like all the projector set ups have clear lenses
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top