1. Remove door trim panel, refer toDoor trim removal.Note that the door panel does not have to be entirely removed. After removing the three door screws, the right hand side of the door can be unsnapped enough from the fasteners to access the mirror bolts. 2. Disengage power mirror harness connector. 3. Remove the foam flag seal covering the mounting area.4. Remove the three nuts attaching mirror to door.5. Carefully separate mirror from door. There is a rubber gasket in the center that the wires pass through, it may help a little to push the gasket through from the inner door side with your fingers while pulling the mirror off from the outside.