Hi!
Does anyone knows how to integrate one of the new MyGig Head units on my 2001 Grand Cherokee?
I do understand that some harness ou interface should be needed but googling the internet I wasn't able to find a solution
Anyone can, please, help me?
Thanks in advance
Don't think you're going to be able to find anything plug and play. The WJ's I'm pretty sure have a PCI BUS, and the newer vehicles (that have the MyGig) run off of a CANBUS.
It would take quite a bit of reverse engineering to get the MyGig to be able to use the signals that the PCIBUS transmits.
I remember back a while ago when I had my 01 Intrepid R/T there were talks of PAC-AUDIO coming out with an adapter to be able to put the REC/MyGig in the LH line (which also uses the PCIBUS), but I don't think anything ever came of it.
I'm 99% sure the WJ has the PCIBUS, like they LH, because they only factory navigation option for both of them was either the RB1 or RB4.
This is what you would need, but they don't make it for the WJ
Yes a WJ does have PCI-BUS. I personally don't think it would be worth the effort though. Since you can get the same features through some aftermarket units.
You'll also have to make a dd bezel for it, which isn't hard to do just takes a little shile to get all the lines right.
Just my $.02
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Garage - Jeep Forum
1.7M posts
176.1K members
Since 2009
Jeep Garage is where you can talk about all your favorite jeeps including the Cherokee, Liberty and Grand Cherokee.